Packaging

Real catalogue sizes

Your label or design

Back label (optional)

Packaging colors

Real catalogue colors

Label finish

Packaging colors

Packaging colors

How to proceed

1. Pick the jar and check its real label area in the card on the right.
2. Upload your design — it is trimmed and fitted automatically.
3. Fine-tune zoom and position in the frame, then hit "Preview in 3D".
4. Drag to spin the jar and pick body and cap colors.

1. Pick the size: the label area updates to the real millimetres on the technical sheet.
2. Upload your design — the editor tells you the print resolution in dpi.
3. Mind the hatched seam: that is where the label closes at the back.
4. Drag to spin the bottle and pick the cap color.

1. Prepare the front and, optionally, the back at the size shown in the label dimensions card.
2. Upload each side in its own box — they fit automatically.
3. Adjust each label in its frame, then hit "Preview in 3D".
4. Spin the pouch and pick the pouch color (back and gussets).

1. One single sheet: the back sits split across both edges of the file and the front in the middle.
2. Upload it — the label wraps right round the stick.
3. Adjust it in the frame, then hit "Preview in 3D".
4. The outer 5 mm on each edge are welded into the back fin: keep your logo off them.